Subscription Group Health Care

This bundle includes: EC3 Air Purification Candles - 3 Pack  EC3 Laundry Additive EC3 Mold Solution Spray EC3 Air Purification Candles – 3 Pack are a simple way to control mold levels in your indoor air. The heat from the flame aerosolizes the natural botanicals embedded in the soy wax. The candles have no added fragrance, so as not to aggravate chemical sensitivities common in mold sufferers. These candles can reduce the mold count in a room from TNC (Too Numerous to Count) to nearly 0 in less than 3 hours. Each candle will burn for approximately 16 hours. Do not use EC3 Candles if you have an allergy to soy. The EC3 Laundry Additive is an all-natural, non-toxic, botanically-based rinse designed to remove the mold and bacteria that becomes trapped in your clothing and bedding. By adding two ounces to your regular wash, you will experience cleaner, fresher-smelling laundry. Regular use will also help keep your washing machine mold free and clean. Since our products do not spoil like a food item, we list the Manufacture Date on our bottles, instead of an Expiration Date.  Our products are made of natural ingredients which include citrus seed extracts and oils. As with any natural product, color may vary and settling/separation may occur. Please shake well before use. EC3 Mold Solution Spray is an all-natural, botanically-based spray that is proven to decrease mold and mycotoxin levels on the hard and soft surfaces of your home. Since our products do not spoil like a food item, we list the Manufacture Date on our bottles, instead of an Expiration Date.  Our products are made of natural ingredients which include citrus seed extracts and oils. As with any natural product, color may vary and settling/separation may occur. Please shake well before use. 

Read All less

Included in this kit: 1 - Mold Screening Test Kit - 6 Pack 1 - EC3 Sanitizer Fogger (110v) 1 - EC3 Mold Solution Concentrate EC3 SANITIZER Fogger (110V) is an Ultra Low Volume sprayer specifically designed to apply antibacterial, deodorizing, and antifungal solutions to indoor spaces. When used with EC3 Mold Solution Concentrate, the fogger expels a volume-controlled, ultra-fine mist that blankets and fills indoor spaces to address mold in the air and on surfaces. Mold Screening Test Plates - 6 pack are formulated to culture the widest possible array of molds. Find out where and how severe your mold problem is with our simple and affordable screening test for your home, office, and/or car. Directions and results key included. EC3 Mold Solution Concentrate is a natural, safe, botanically-based solution that will not harm or leave a residue on furnishings, upholstered items, non-washable clothing, shoes, carpets, curtains, surfaces, both human and dog beds, basements, attics, etc. Regular use will enable your body to heal better while at home. Read the independent laboratory evaluation proving EC3 Mold Solution’s efficacy. Use EC3 Mold Solution Concentrate to target musty smells in non-washable textiles and furnishings. Product can also be applied to hard surfaces and areas where you suspect mold growth or feel yourself reacting. When used regularly, indoor mold counts can be significantly reduced. Directions: Mist diluted solution on soft surfaces like drapes, furniture or carpets and allow to air dry. Spray or wipe on hard surfaces, such as counter tops and floors, and allow to air dry or wipe off. This product is safe for all materials, surfaces and fabrics. Items and areas can be treated as often as needed.   Since our products do not spoil like a food item, we list the Manufacture Date on our bottles, instead of an Expiration Date.  Our products are made of natural ingredients which include citrus seed extracts and oils. As with any natural product, color may vary and settling/separation may occur. Please shake well before use.  Directions For Use: Use EC3 Mold Solution Concentrate to target musty smells in non-washable textiles and furnishings. Product can also be applied to hard surfaces and areas where you suspect mold growth or feel yourself reacting. When used regularly, indoor mold counts can be significantly reduced. Directions: Mist diluted solution on soft surfaces like drapes, furniture or carpets and allow to air dry. Spray or wipe on hard surfaces, such as counter tops and floors, and allow to air dry or wipe off. This product is safe for all materials, surfaces and fabrics. Items and areas can be treated as often as needed. This product is safe for children and pets, does not off-gas, contains no harmful chemicals and is not toxic. Product can also be used in the EC3 fogger to tackle mold and toxins in larger areas. EC3 can also be used for car heating and air conditioning systems and on vehicle upholstery to address particulates inside of your vehicle. For Fogger: Fill fogger drum with EC3 Mold Solution Concentrate diluted per bottle instructions. Use the calibration dial to select the spray volume needed. Enter the room or space where the fogger will be used. Plug the fogger into an outlet. (We suggest using an extension cord to have more ability to move around a room or an object for best coverage.) Turn the fogger on and disperse the mist in a steady up/down motion, so that it fully fills and covers a room, or so that it is evenly applied all over a surface or object. Hold the fogger steady with the handle to ensure a steady flow of EC3 through the machine. Turn off when finished. Drain and clean fogger after use. For Air Testing: Enter room or area that you wish to test. Remove test plate from clear plastic sleeve. Take lid off test plate and place open plate on a flat surface away from walls and windows. Place lid open side down next to the test plate. Go about your activities as normal. After 1 hour, place lid back on top of test plate. Seal plate closed with tape. Wrap sealed plate in aluminum foil. Label wrapped plate with name of room or space tested and date. Place wrapped and labelled plate in a drawer or cabinet. When 5 days have elapsed since the date of testing, remove the aluminum foil to reveal results. DO NOT unseal or open test plate. Use the KEY included with the test kit to determine your results.

Read All less

EC3 Sani-Tizer Fogger (110V) EC3 Mold Solution Concentrate EC3 Laundry Additive EC3 Mold Test Plates - 6 pack ECEC3 SANITIZER Fogger (110V) is an Ultra Low Volume sprayer specifically designed to apply antibacterial, deodorizing, and antifungal solutions to indoor spaces. When used with EC3 Mold Solution Concentrate, the fogger expels a volume-controlled, ultra-fine mist that blankets and fills indoor spaces to address mold in the air and on surfaces. EC3 Mold Solution Concentrate is a natural, safe, botanically-based solution that will not harm or leave a residue on furnishings, upholstered items, non-washable clothing, shoes, carpets, curtains, surfaces, both human and dog beds, basements, attics, etc. Regular use will enable your body to heal better while at home. Read the independent laboratory evaluation proving EC3 Mold Solution’s efficacy. Use EC3 Mold Solution Concentrate to target musty smells in non-washable textiles and furnishings. Product can also be applied to hard surfaces and areas where you suspect mold growth or feel yourself reacting. When used regularly, indoor mold counts can be significantly reduced. Directions: Mist diluted solution on soft surfaces like drapes, furniture or carpets and allow to air dry. Spray or wipe on hard surfaces, such as counter tops and floors, and allow to air dry or wipe off. This product is safe for all materials, surfaces and fabrics. Items and areas can be treated as often as needed.   Since our products do not spoil like a food item, we list the Manufacture Date on our bottles, instead of an Expiration Date.  Our products are made of natural ingredients which include citrus seed extracts and oils. As with any natural product, color may vary and settling/separation may occur. Please shake well before use.  The EC3 Laundry Additive is an all-natural, non-toxic, botanically-based rinse designed to remove the mold and bacteria that becomes trapped in your clothing and bedding. By adding two ounces to your regular wash, you will experience cleaner, fresher-smelling laundry. Regular use will also help keep your washing machine mold free and clean.  Since our products do not spoil like a food item, we list the Manufacture Date on our bottles, instead of an Expiration Date.  Our products are made of natural ingredients which include citrus seed extracts and oils. As with any natural product, color may vary and settling/separation may occur. Please shake well before use. Mold Screening Test Plates - 6 pack are formulated to culture the widest possible array of molds. Find out where and how severe your mold problem is with our simple and affordable screening test for your home, office, and/or car. Directions and results key included.

Read All less

This EC3 Sanitizer Fogger And Mold Solution Concentrate Bundle contains one (1) bottle of our EC3 Mold Solution Concentrate for use with our EC3 Sanitizer mold fogger. While not a replacement for professional mold remediation, fogging is an excellent way to temporarily provide a safe environment for homes that are affected by mold and mycotoxins. The products in this kit can also be used for routine cleaning and maintenance to significantly improve the quality of your indoor air, which can be helpful in homes where individuals living with mold sensitivity are present. Fogging with EC3 Mold Solution is an effective way to temporarily clean and deodorize your indoor air, surfaces, and belongings. While not a replacement for professional mold remediation, fogging can temporarily provide a safe environment for those affected by mold and mycotoxins. Fogging is also beneficial for routine cleaning and maintenance for mold-sensitized individuals. Regular fogging can have a dramatic impact on indoor air quality. Included in this kit:1 - EC3 Sanitizer Fogger (110v) 1 - EC3 Mold Solution Concentrate EC3 SANITIZER Fogger (110V) is an Ultra Low Volume sprayer specifically designed to apply antibacterial, deodorizing, and antifungal solutions to indoor spaces. When used with EC3 Mold Solution Concentrate, the fogger expels a volume-controlled, ultra-fine mist that blankets and fills indoor spaces to address mold in the air and on surfaces. EC3 Mold Solution Concentrate is a natural, safe, botanically-based solution that will not harm or leave a residue on furnishings, upholstered items, non-washable clothing, shoes, carpets, curtains, surfaces, both human and dog beds, basements, attics, etc. Regular use will enable your body to heal better while at home. Read the independent laboratory evaluation proving EC3 Mold Solution’s efficacy.  Since our products do not spoil like a food item, we list the Manufacture Date on our bottles, instead of an Expiration Date.  Our products are made of natural ingredients which include citrus seed extracts and oils. As with any natural product, color may vary and settling/separation may occur. Please shake well before use.  Concentrate Active Ingredients: Proprietary natural botanical blend of citrus seed extracts. Concentrate Inactive Ingredients: Distilled water, Vegetable glycerin Directions: Fill fogger drum with EC3 Mold Solution Concentrate diluted per bottle instructions. Use the calibration dial to select the spray volume needed. Enter the room or space where the fogger will be used. Plug the fogger into an outlet. (We suggest using an extension cord to have more ability to move around a room or an object for best coverage.) Turn the fogger on and disperse the mist in a steady up/down motion, so that it fully fills and covers a room, or so that it is evenly applied all over a surface or object. Hold the fogger steady with the handle to ensure a steady flow of EC3 through the machine. Turn off when finished. Drain and clean fogger after use. EC3 Mold Solution Concentrate is safe for all materials, surfaces and fabrics. It is safe to treat items and areas as often as needed. EC3 Mold Solution Concentrate is safe for children and pets, does not off-gas, contains no harmful chemicals, and is not toxic. The fogger is best used to treat larger areas or items.

Read All less

Concentrate Active Ingredients: Proprietary natural botanical blend of citrus seed extracts. Concentrate Inactive Ingredients: Distilled water, Vegetable glycerin Directions: Fill fogger drum with EC3 Mold Solution Concentrate diluted per bottle instructions. Use the calibration dial to select the spray volume needed. Enter the room or space where the fogger will be used. Plug the fogger into an outlet. (We suggest using an extension cord to have more ability to move around a room or an object for best coverage.) Turn the fogger on and disperse the mist in a steady up/down motion, so that it fully fills and covers a room, or so that it is evenly applied all over a surface or object. Hold the fogger steady with the handle to ensure a steady flow of EC3 through the machine. Turn off when finished. Drain and clean fogger after use. EC3 Mold Solution Concentrate is safe for all materials, surfaces and fabrics. It is safe to treat items and areas as often as needed. EC3 Mold Solution Concentrate is safe for children and pets, does not off-gas, contains no harmful chemicals, and is not toxic. The fogger is best used to treat larger areas or items.

Read All less

This bundle contains everything you need to begin cleaning your surfaces and washable items for mold spores and mycotoxins. It makes it easy and affordable to purchase two of our customer favorite products together, with an automatic discount.  This bundle includes: 1 bottle of EC3 Mold Solution Spray 1 bottle of EC3 Laundry Additive EC3 Mold Solution Spray is an all-natural, non-toxic, botanically-based, ready-to-use spray that works on contact to manage the mold and bacteria that collects on both hard and soft surfaces. It contains a proprietary blend of citrus seed extracts, making it antifungal, antibacterial, and a vital part of maintaining a mold-safe, healthier home. Read the independent lab test confirming EC3 Mold Solution's effectiveness.  Since our products do not spoil like a food item, we list the Manufacture Date on our bottles, instead of an Expiration Date.  Our products are made of natural ingredients which include citrus seed extracts and oils. As with any natural product, color may vary and settling/separation may occur. Please shake well before use.  EC3 Laundry Additive is designed for use in your washing machine’s rinse cycle to eliminate mold, bacteria, and the musty/putrid odors that can become embedded in clothing and fabrics, even after multiple washes. Fabrics pick up mold, bacteria, and moisture from the environment and your skin, holding it close to your body, sometimes causing reactions and irritation. EC3 Laundry Additive tackles the antigens that detergent alone often fails to eliminate. Since our products do not spoil like a food item, we list the Manufacture Date on our bottles, instead of an Expiration Date.  Our products are made of natural ingredients which include citrus seed extracts and oils. As with any natural product, color may vary and settling/separation may occur. Please shake well before use. Mold Spray Size: 32 FL OZ. Concentrate Mold Spray Active Ingredients: Proprietary natural botanical blend of citrus seed extracts. Mold Spray Inactive Ingredients: Distilled water, Vegetable Glycerin Laundry Additive Size: 32 oz concentrate Laundry Additive Active Ingredients: Tea Tree Oil and a proprietary natural botanical blend of citrus seed extracts Laundry Additive Inactive Ingredients: Distilled water Directions For Use: MOLD SPRAY: Mist the entire house with EC3 Mold Solution Spray. Once an object or area is treated, allow it to air-dry. Treat as often as needed. For a wide-area mist, twist the nozzle slightly to the right. For a more direct stream, continue to twist the nozzle all the way to the right. Use the spray weekly or more often if mold counts are not decreasing. Pay special attention to carpets and rugs, as these are the largest filters that collect and retain debris in your home. You can even mist or use a cloth to treat your pet’s fur to prevent them from tracking mold spores into your home. It can also be used on car interiors and in heating and air systems to prevent and treat mold formation or circulation. If an item is covered with visible mold it really is best to discard it. Caution: If applying to fine wood furniture that is susceptible to water stains, product should be misted on and then wiped off after one minute has passed. ----- LAUNDRY ADDITIVE: Add two (2) ounces of the laundry additive to the rinse cycle reservoir (where you normally add your fabric softener) of your washing machine for every regular wash cycle. This product should be used in addition to your normal detergent or bleaching agent. EC3 Laundry Additive is safe for use on all washable fabrics, and is free from all harmful chemicals, synthetic perfumes or dyes. It works with all HE appliances.

Read All less

EC3 Mold Solution Spray is a natural botanical that treats indoor environments for mold and mycotoxins.  Highly effective and ready-to-use, this mold spray is safe for all materials, surfaces and fabrics, and contains no harmful chemicals.   This product is safe for all materials and designed to treat mold and bacterial contamination on all of your hard and soft surfaces including, floors, walls, furnishings, clothes, shoes, car interiors, and more! The spray can only treat the areas where applied. It works best when used frequently to maintain healthy mold levels and to prevent a general build-up of mold in your home, office, or car. The spray is nontoxic and is safe for use around children and pets. Read the independent laboratory test confirming EC3 Mold Solution's effectiveness. EC3 Mold Solution Spray is a vital part of the Environmental Treatment Protocol developed by Dr. Don Dennis, MD FACS, for sufferers of chronic sinusitis or other mold-related diseases.  EC3 Mold Solution Spray and EC3 Air Purification Candles are designed to work together to clean your home, office, or car.   To treat discolored grout or tile, it is recommended to use EC3 Mold Solution Spray with some form of scrubbing or high-pressure spray or steam for best results.  Ingredients: Proprietary natural botanical blend of citrus seed extracts, Distilled water, Vegetable glycerin Directions For Use: Mist the entire house with EC3 Mold Solution Spray. Once an object or area is treated, allow it to air-dry. Treat as often as needed. Use the spray weekly or more often if mold counts are not decreasing. Pay special attention to carpets and rugs, as these are the largest filters that collect and retain debris in your home. For a wide-area mist, twist the nozzle slightly to the right from the closed position. For a more direct stream, continue to twist the nozzle all the way to the open (right) position. You can even mist or use a cloth to treat your pet’s fur to prevent them from tracking mold spores into your home. It can also be used on car interiors and in heating and air systems to prevent and treat mold formation or circulation. If an item is covered with visible mold it really is best to discard it. Caution: If applying to fine wood furniture that is susceptible to water stains, product should be misted on and then wiped off after one minute has passed.

Read All less

A powerful duo of our most popular, natural, botanically-based products for managing mold and bacteria in all areas of your home and on your belongings. EC3 Mold Solution Concentrate should be used on surfaces, upholstery, and furniture.  EC3 Laundry Additive should be used for clothing and all washable fabrics. EC3 Mold Solution Concentrate is a non-toxic solution. It contains a proprietary blend of citrus seed extracts designed to remove mold spores from both hard and soft surfaces. The solution is antifungal and antibacterial, works on contact, and is a vital part of maintaining a mold-safe, healthier home. Once properly diluted with distilled water per package directions, 1 bottle can yield 1 gallon of mold solution. Read the independent lab test confirming EC3 Mold Solution's effectiveness. Since our products do not spoil like a food item, we list the Manufacture Date on our bottles, instead of an Expiration Date.  Our products are made of natural ingredients which include citrus seed extracts and oils. As with any natural product, color may vary and settling/separation may occur. Please shake well before use.  EC3 Laundry Additive is designed for use in your washing machine’s rinse cycle to eliminate mold, bacteria, and the musty/putrid odors that can become embedded in clothing and fabrics, even after multiple washes. Fabrics pick up mold, bacteria, and moisture from the environment and your skin, holding it close to your body, sometimes causing reactions and irritation. EC3 Laundry Additive tackles the antigens that detergent alone often fails to eliminate.  Since our products do not spoil like a food item, we list the Manufacture Date on our bottles, instead of an Expiration Date.  Our products are made of natural ingredients which include citrus seed extracts and oils. As with any natural product, color may vary and settling/separation may occur. Please shake well before use.  Concentrate Size: 16 FL OZ. Concentrate Concentrate Active Ingredients: Proprietary natural botanical blend of citrus seed extracts. Concentrate Inactive Ingredients: Distilled water, Vegetable glycerin Laundry Additive Size: 32 FL OZ Concentrate Additive Active Ingredients: Tea Tree Oil and a proprietary natural botanical blend of citrus seed extracts Additive Inactive Ingredients: Distilled water MOLD CONCENTRATE: Use to eliminate musty smells in non-washable textiles and furnishings, or to help control mold levels in your home on hard surfaces and areas where you suspect mold growth or feel yourself reacting. When used regularly, this product can keep indoor mold counts down to acceptable levels. Directions: Mist diluted solution on soft surfaces like drapes, furniture or carpets and allow to air dry. Spray or wipe on hard surfaces, such as counter tops and floors, and allow to air dry or wipe off. This product is safe for all materials, surfaces and fabrics. Treating items and areas for mold can be done as often as needed. This product is safe for children and pets, does not off-gas, contains no harmful chemicals and is not toxic. Product can also be used in the fogger to treat larger areas for mold, or to spray your car heating and air conditioning system to clear and prevent mold accumulation and circulation inside of your vehicle.--- LAUNDRY SOLUTION: Add two (2) ounces of the laundry additive to the rinse cycle reservoir (where you normally add your fabric softener) of your washing machine for every regular wash cycle. This product should be used in addition to your normal detergent or bleaching agent. EC3 Laundry Additive is safe for use on all washable fabrics, and is free from all harmful chemicals, synthetic perfumes or dyes. It works with all HE appliances.

Read All less

Micro Balance EC3 Mold Solution Concentrate is a natural botanical that removes mold spores, bacteria, and musty smells from hard and soft surfaces with no harmful chemicals and can be used to decrease the overall mold load in your indoor environments.   This non-toxic solution contains a proprietary blend of citrus seed extracts designed to control mold levels in your home where you suspect mold growth. Additionally, independent laboratory test confirms the efficacy of EC3 Mold Solution.  Spraying and misting EC3 Mold Solution are ways to remove mold spores and bacteria that naturally float in the air and land on all surfaces including hard surfaces like counter tops, furniture and floors, and soft surfaces like drapes, furniture, and carpets.  It is most effective when followed by HEPA vacuuming to physically remove debris.     Control musty smells on non-washable textiles and furniture.  EC3 Mold Solution Concentrate is safe for use on all materials, surfaces, and fabrics and is safe to be used around children and pets.  It does not contain harmful chemicals and is non-toxic.   EC3 Mold Solution Concentrate should be diluted per package instructions and used in a spray bottle, mister, or fogger to treat larger areas.   To treat discolored grout or tile, it is recommended to use EC3 Mold Solution Spray with some form of scrubbing or high-pressure spray or steam for best results.  Using EC3 Mold Solution Concentrate regularly is a vital part of the Environmental Treatment Protocol developed by Dr. Don Dennis, Board-Certified Ear, Nose and Throat MD FACS to reduce mold counts indoors.  Read independent Laboratory report on EC3 products' effectiveness.   EC3 Mold Solution Concentrate, made out of a proprietary blend of citrus seed extracts, is designed to control mold levels in your home where mold growth is suspected. This non-toxic natural botanical formula removes mold spores and bacteria that float in the air and can be used on all hard and soft surfaces, including countertops, floors, furniture, carpets, and drapes. It can also help control musty smells on non-washable textiles and furniture.  For best results, dilute the product according to the package instructions and use in a spray bottle or mister. Follow up with HEPA vacuuming to physically remove debris. Ingredients: Proprietary natural botanical blend of citrus seed extracts, Distilled water, Vegetable glycerin Directions: Spraying, misting, or fogging EC3 Mold Solution are effective ways to remove mold spores and bacteria that naturally float in the air and land on all surfaces. When used regularly, this product can keep indoor mold counts down to acceptable levels. EC3 Mold Solution Concentrate can be used after diluting in a spray bottle, mister or fogger to treat larger areas. Using EC3 Mold Solution Concentrate regularly is a vital part of the Environmental Treatment Protocol developed by Dr. Don Dennis, board certified Ear, Nose and Throat MD FACS.

Read All less

EC3 Mold Screening Test Kit is an effective mold detection kit that includes everything you need to test for elevated levels of mold in your indoor air or on belongings. Each kit includes 6 mold test plates, as well as detailed instructions on how to perform a test for the presence of mold in your indoor air or on specific items and/or surfaces. It takes just a few minutes to test, and you can use the package insert to read your results in just 5 days. Note: This is NOT a diagnostic test and does NOT provide information as to the species or types of mold present. This test kit does not include laboratory analysis. Contains: 6 MALT EXTRACT AGAR WITH 0.01% CHLORAMPHENICOL PLATES. Intended Use: Malt Extract Agar is used for the isolation, cultivation and enumeration of yeasts and molds. This is a self-development test and does not come with a laboratory analysis. Each plate has expiration date printed on bottom of each plate. DIRECTIONS: (Note: Detailed instructions and a results key are included with each kit.) For Air Testing: Enter room or area that you wish to test. Remove test plate from clear plastic sleeve. Take lid off test plate and place open plate on a flat surface away from walls and windows. Place lid open side down next to the test plate. Go about your activities as normal. After 1 hour, place lid back on top of test plate. Seal plate closed with tape. Wrap sealed plate in aluminum foil. Label wrapped plate with name of room or space tested and date. Place wrapped and labelled plate in a drawer or cabinet. When 5 days have elapsed since the date of testing, remove the aluminum foil to reveal results. DO NOT unseal or open test plate. Use the KEY included with the test kit to determine your results. If further diagnostics testing is needed, use one of the Environmental Mycotoxin Tests. Dispose of used test plates in outside trash receptacle. To Test Specific Items: Remove test plate from clear sleeve. Remove lid from test plate and set aside. Gently tap the item you wish to test with the plate 1-2 times. Make sure that the agar material is exposed to the item being tested when tapping. The puffs of air created from the tapping motion will cause any mold spores embedded in the item to attach to the agar material. Place lid back on test plate. Seal plate closed with tape. Wrap sealed plate in aluminum foil. Label wrapped plate with name of object tested and date. Place wrapped and labelled plate in a drawer or cabinet. When 5 days have elapsed since the date of testing, remove the aluminum foil to reveal results. DO NOT unseal or open test plate. Use the KEY included with the test kit to determine your results. Note: Each plate has an expiration date. Use before expiration date. As plates age, water will begin to condense onto the top of plate and may pool inside the plate. When you are ready to perform test, drain excess water from the plate first. Since the plates do expire, we do not accept returns for refunds.

Read All less

Add EC3 Laundry Additive to every rinse cycle or directly to the wash basin to rinse away mold spores, bacteria, and foul/musty odors from clothes, towels, and your washing machine. EC3 Laundry Additive Key Features and Benefits: Use during wash cycle to remove mold and bacteria from clothing, towels, linens, and athletic wear Contains "food-grade" citrus seed extracts, tea tree oil, and natural surfactants to clean away mold spores and foul odor-causing bacteria and yeast All Natural - No Harmful Chemicals - 100% free of metasilicates, caustics, chlorine, ammonia, and phosphates Helps to maintain a mold and bacteria-free washing machine Use with other EC3 Products to maintain a healthier home Safe for all regularly laundered fabrics Rinse Away Bacteria and Mold Spores from clothes, linens, and towels:  EC3 Laundry Additive rinses away bacteria and mold spores that get trapped in your clothing and other fabrics that regular washing alone doesn't eliminate. Stop wearing mold on your clothes and carrying it with you right under your nose, wherever you go.   Going to bed each night with moldy sheets and pillowcases can cause allergy symptoms and poor sleep quality.  Night sweating and the shedding of dead skin cells also contribute to mold growth in linens and pillowcases.  EC3 Laundry Additive tackles this problem and also removes odors from musty and sweaty gym clothes.  When sweat meets bacteria and/or mold on your skin or clothing, putrid odors result.  Unfortunately, people often mistakenly try to use fabric softener to eliminate these odors but doing so only adds chemical fragrances and masks the problem.  Clean is actually the ABSENCE of smell.  EC3 Laundry Additive gets your washable fabrics clean by rinsing away the mold and bacteria that create the odors in the first place.   Maintain a Mold-Free Washing Machine: EC3 Laundry Additive helps maintain a clean and odor-free washing machine, especially high-efficiency front-loading machines.  Front loaders can trap residual moisture and fabric softener, fostering a moldy environment after each load.  Clean your clothes, linens, and washing machine with EC3 Laundry Additive and improve your health.   Ingredients: Tea Tree and Tangerine Oils, a proprietary botanical blend of citrus seed extracts, distilled water, natural surfactant Directions For Use:LAUNDRY IN HE WASHERS - Add one (1) ounce of Laundry Additive to the rinse cycle reservoir (where you normally add your fabric softener) of your washing machine for every regular wash cycle. LAUNDRY IN OTHER WASHERS - Add two (2) ounces of Laundry Additive in the same manner as above. TO CLEAN WASHER - Add three (3) ounces into the bleach well or into the body of the machine and select the CLEAN cycle on your washer. This product should be used in addition to your normal detergent or bleaching agent. EC3 Laundry Additive is safe for use on all washable fabrics, and is free from all harmful chemicals, synthetic perfumes or dyes. It works with all HE appliances.

Read All less

EC3 Essentials Mold Solution Concentrate is a smaller, 8-ounce bottle of our non-toxic, botanical cleaning concentrate that removes mold spores, bacteria, and musty smells from hard and soft surfaces. It contains no harmful chemicals and can be used to decrease the overall mold load in your indoor environments. The 8-ounce bottle makes 1/2 gallon of solution when mixed per bottle instructions.  This non-toxic solution contains a proprietary blend of citrus seed extracts designed to control mold levels in your home where you suspect mold growth. Additionally, independent laboratory test confirms the efficacy of EC3 Mold Solution.  Spraying and misting EC3 Mold Solution are ways to remove mold spores and bacteria that naturally float in the air and land on all surfaces including hard surfaces like counter tops, furniture and floors, and soft surfaces like drapes, furniture, and carpets.  It is most effective when followed by HEPA vacuuming to physically remove debris.     EC3 Mold Solution Concentrate is safe for use on all materials, surfaces, and fabrics and is safe to be used around children and pets.  It does not contain harmful chemicals and is non-toxic.   EC3 Mold Solution Concentrate should be diluted per package instructions and used in a spray bottle, mister, or fogger to treat larger areas. One 8-ounce bottle makes 1/2 gallon of mold solution. This case contains 12, 8-ounce bottles. To treat discolored grout or tile, it is recommended to use EC3 Mold Solution Spray with some form of scrubbing or high-pressure spray or steam for best results. The solution does NOT lift stains on contact. Using EC3 Mold Solution Concentrate regularly is a vital part of the Environmental Treatment Protocol developed by Dr. Don Dennis, Board-Certified Ear, Nose and Throat MD FACS to reduce mold counts indoors. 

Read All less

EC3 Essentials Laundry Additive is a smaller, 8-ounce bottle of our natural, non-toxic, botanically based laundry rinse designed to remove the mold spores and bacteria that get trapped in your clothing and bedding. By adding two ounces to your regular wash, you will experience cleaner, fresher-smelling laundry. Regular use will also help keep your washing machine mold-free and clean. This 8-ounce bottle is a great trial size and is enough for cleaning and deodorizing 4 medium-size loads of laundry.  Rinse Away Bacteria and Mold Spores Using EC3 Laundry Additive rinses away bacteria and mold spores that get trapped in your clothing and other fabrics that regular washing alone can't eliminate.  Don't carry mold with you wherever you go and don't wear it right under your nose! Remove Musty and Putrid Smells EC3 Laundry Additive removes musty and putrid smells from washable textiles including bed linens and pillowcases.  Without it, you sleep each night with mold scarily close to your body.  Night sweating and dead skin cells also contribute to linens and pillowcases being breeding grounds for mold.  You can also attribute irremovable musty smells on towels and sweaty gym clothes.  This happens when sweat meets bacteria.  People often mistakenly use fabric softener to eliminate odors but are only adding perfume to the problem.   Maintain a Mold-Free Washing Machine EC3 Laundry Additive helps maintain a mold-free washing machine, especially high efficiency front load machines.  These machine types can harbor mold, moisture and fabric softener, nourishing a moldy environment after each load.  Clean your clothes, linens and washing machine with EC3 Laundry Additive and improve your health.  

Read All less

The EC3 Essentials Kit is a great travel companion or introduction to our EC3 line of environmental products! This kit contains everything you need to begin cleansing your indoor air, surfaces, and washable items of mold and bacteria. Included in the kit are one EC3 Air Purification Candle, one 8-ounce bottle of EC3 Mold Solution Concentrate (makes 1/2 gallon of mold solution), and one 8-ounce bottle of EC3 Laundry Additive (enough for washing 4 medium-sized loads of laundry). An EC3 Air Purification Candle is a simple way to control mold levels in your indoor air. The heat from the flame aerosolizes the natural botanicals embedded in the soy wax. The candles have no added fragrance, so as not to aggravate chemical sensitivities common in mold sufferers. These candles can reduce the mold count in a room from TNC (Too Numerous to Count) to nearly 0 in less than 3 hours. Each candle will burn for approximately 16 hours. Do not use EC3 Candles if you have an allergy to soy. EC3 Laundry Additive is an all-natural, non-toxic, botanically based rinse designed to remove the mold and bacteria that gets trapped in your clothing and bedding. By adding two ounces to your regular wash, you will experience cleaner, fresher-smelling laundry. Regular use will also help keep your washing machine mold free and clean. The 8-ounce bottle of EC3 Laundry Additive included in the EC3 Essentials Kit will clean 4 medium-size loads of laundry when used per bottle directions. EC3 Mold Solution Concentrate is a natural botanical that removes mold spores, bacteria, and musty smells from hard and soft surfaces with no harmful chemicals and can be used to decrease the overall mold load in your indoor environments. This non-toxic solution contains a proprietary blend of citrus seed extracts designed to control mold levels in your home or anywhere that you suspect mold growth. Independent laboratory testing confirms the efficacy of EC3 Mold Solution Concentrate. Once diluted per bottle instructions, spraying and misting EC3 will remove mold spores and bacteria that naturally float in the air and land on all surfaces including hard surfaces like counter tops and floors, and soft surfaces like drapes, furniture, and carpets. The 8-ounce bottle of EC3 Mold Solution Concentrate included in the EC3 Essentials Kit will make 1/2 gallon of solution when diluted per bottle instructions.

Read All less

EC3 Enzyme Cleaner Concentrate is specifically blended for cleaning and stain removal. Its formula enzymatically digests and dissolves dirt, grease, urine, mold spores, and organic material to truly, naturally clean and deodorize just about any surface or material. It should be diluted per bottle instructions for general, everyday cleaning, or can be used full-strength for deeper, concentrated cleaning, drain treatment, or stubborn stains. The applications for this concentrate are limitless! A separate spray top is included with every bottle. We designed EC3 Enzyme Cleaner Concentrate to fill the need for a nontoxic, all-purpose, cleaning and stain removal product that also addresses mold and mycotoxin levels in the home. While this product has a light lemon-mint scent, it does not contain perfumes, harmful chemicals, or dyes. The formula is a safe, effective alternative to harsh chemicals without sacrificing cleaning power. Fast-acting and unique, this cleaner penetrates the organic matter that holds dirt, stains, and mold spores together, breaking them down for easy removal with no harmful residue or byproducts.  Key Features and Benefits of EC3 Enzyme Cleaner Concentrate: Dissolves grease, oils, stains, mold spores, mold stains, biofilms, and protein matter on contact Completely removes urine and ingrained odors without the addition of synthetic perfumes Pet-, surface- and people-safe formula Powered by our proprietary blend of citrus seed extracts proven effective for mold spores and mycotoxins by a 3rd-party, CAP-accredited lab Made in the USA 100% eco-friendly and biodegradable Endless uses and applications Use suggestions: General cleaning, stain removal, drain treatment, tile, grout, pavers, laundry, pet urine odors and stains Ingredients: Water, Enzyme blend: protease, amylase, cellulase, lipase, Alkyl polyglucoside (from coconuts), Tetrasodium glutamate diacetate (organic glutamic acid salt), Glycolic acid, Blend of citrus seed extracts, Lemon, tangerine, & mint oils, Polysorbate Directions For Use: General, Multipurpose Cleaning: (Always dilute for general use.) Mix 4 ounces of concentrate per gallon of water. Stain Removal: Thoroughly spray stains with full-strength concentrate and wait 5 minutes before rinsing or wiping. For tougher stains, use a stiff brush to help lift the stain. If the stain is still visible, reapply the concentrate, allow it to penetrate for an hour, and then rinse, wipe, or scrub away the stain with a clean sponge, brush, or cloth. Laundry: To pretreat, saturate stained areas with full-strength concentrate. Make sure to rub into the stain to allow enzymes to penetrate. Wait for at least 5 minutes before washing as usual. To brighten and deodorize regular loads, add 3 ounces of concentrate to the washer and wash with warm/hot water and mild, non-scented detergent. Drains, Septic Tanks: Pour concentrate directly into the drain or tank. Wait for at least 10 minutes before flushing with warm/hot water.

Read All less

The EC3 Environmental Kit includes everything you need to begin testing and cleaning your home, indoor air, and belongings for mold. All EC3 products are safe, non-toxic, and proven to be effective. Save 15% by purchasing these products as a bundle. The EC3 Environmental Kit includes: 1 - Mold Screening Test Kit - 6 Pack (Note: Each plate has an expiration date.  Use before expiration date.  As plates age, water will begin to condense onto the top of plate and may pool inside the plate. When you are ready to perform test, drain excess water from the plate first.  Since the plates do expire, we do not accept returns for refunds on the plates.)  1 - 32 oz. EC3 Mold Solution Spray 1 - 32 oz. EC3 Laundry Additive 1 - 3 pack of EC3 Air Purification Candles Mold Screening Test Plates - 6 pack are formulated to culture the widest possible array of molds. Find out where and how severe your mold problem is with our simple and affordable screening test for your home, office, and/or car. Directions and results key included.  EC3 Mold Solution Spray is an all-natural, botanically-based spray that is proven to decrease mold and mycotoxin levels on the hard and soft surfaces of your home. Since our products do not spoil like a food item, we list the Manufacture Date on our bottles, instead of an Expiration Date.  Our products are made of natural ingredients which include citrus seed extracts and oils. As with any natural product, color may vary and settling/separation may occur. Please shake well before use. The EC3 Laundry Additive is an all-natural, non-toxic, botanically-based rinse designed to remove the mold and bacteria that becomes trapped in your clothing and bedding. By adding two ounces to your regular wash, you will experience cleaner, fresher-smelling laundry. Regular use will also help keep your washing machine mold free and clean. Since our products do not spoil like a food item, we list the Manufacture Date on our bottles, instead of an Expiration Date.  Our products are made of natural ingredients which include citrus seed extracts and oils. As with any natural product, color may vary and settling/separation may occur. Please shake well before use.  EC3 Air Purification Candles – 3 Pack are a simple way to control mold levels in your indoor air. The heat from the flame aerosolizes the natural botanicals embedded in the soy wax. The candles have no added fragrance, so as not to aggravate chemical sensitivities common in mold sufferers. These candles can reduce the mold count in a room from TNC (Too Numerous to Count) to nearly 0 in less than 3 hours. Each candle will burn for approximately 16 hours. Do not use EC3 Candles if you have an allergy to soy. Directions For Use: When using EC3 Mold Spray, for a wide-area mist, twist the nozzle slightly to the right from the closed position. For a more direct stream, continue to twist the nozzle all the way to the open (right) position.

Read All less

If you want to create a home and an environment that is mold-free and with the best quality of indoor air, this electrostatic fogger is the ultimate solution for mold control and prevention. This is your ally in creating a mold-free space for those affected by mold and mycotoxins. Make it a part of your routine cleaning and maintenance as it emits a positive charge to each moisture droplet, ensuring that the mold solution reaches maximum coverage and robust surface adhesion. Take control of your environment today and keep mold in check! Fogging with EC3 Mold Solution is an effective way to temporarily clean and deodorize your indoor air, surfaces, and belongings. While not a replacement for professional mold remediation, fogging can temporarily provide a safe environment for those affected by mold and mycotoxins. Fogging is also beneficial for routine cleaning and maintenance for mold-sensitized individuals. Regular fogging can have a dramatic impact on indoor air quality and can keep mold levels lower. The EC3 Electrostatic Sanitizer Fogger has the same 1 gallon tank capacity, 10-50-micron particle size, high-precision nozzles for greater output capacity, and high-performance blower for dispersing droplets of EC3 Mold Solution Concentrate more widely and effectively than competing products, as well as ADVANCED ELECTROSTATIC TECHNOLOGY.  Electrostatic technology provides a positive charge to the droplets as they spray from the machine. As a result, the droplets space more evenly on targeted surface areas for uniform coverage and stronger adhesion. Charged droplets wrap around the entire target surface which also eliminates puddling. This bundle includes two 16-ounce bottles of EC3 Mold Solution Concentrate, that makes 2 gallons of fogging solution when diluted per bottle directions. Included in this bundle: 1 Electrostatic fogger (110v) and 2 bottles of Mold Concentrate (each bottle makes 1 gallon) The EC3 Electrostatic Sanitizer Fogger uses electrostatic technology to positively charge each droplet of EC3 Mold Solution Concentrate to provide increased effectiveness and more uniform coverage on the entire target surface.  This fogger is ideal for use in both commercial and residential spaces. The spray is finer than our basic ULV fogger, the is coverage greater and more even due to the electrostatic feature, and the drying time is also much quicker. EC3 Mold Solution Concentrate is a natural, safe, botanically-based solution that will not harm or leave a residue on furnishings, upholstered items, non-washable clothing, shoes, carpets, curtains, surfaces, both human and dog beds, basements, attics, etc. Regular use will enable your body to heal better while at home. Read the independent laboratory evaluation proving EC3 Mold Solution’s efficacy.  Since our products do not spoil like a food item, we list the Manufacture Date on our bottles, instead of an Expiration Date.  Our products are made of natural ingredients which include citrus seed extracts and oils. As with any natural product, color may vary and settling/separation may occur. Please shake well before use.  Directions For Use: For Fogger: Fill fogger drum with EC3 Mold Solution Concentrate diluted per bottle instructions. Use the calibration dial to select the spray volume needed. Enter the room or space where the fogger will be used. Plug the fogger into an outlet. (We suggest using an extension cord to have more ability to move around a room or an object for best coverage.) Turn the fogger on and disperse the mist in a steady up/down motion, so that it fully fills and covers a room, or so that it is evenly applied all over a surface or object. Hold the fogger steady with the handle to ensure a steady flow of EC3 through the machine. Turn off when finished. Drain and clean fogger after use.

Read All less

The EC3 Electrostatic Sanitizer Fogger uses electrostatic technology to positively charge each droplet of EC3 Mold Solution Concentrate to provide increased effectiveness and more uniform coverage on the entire target surface.  This fogger is ideal for use in both commercial and residential spaces. The spray is finer than our basic ULV fogger, the is coverage greater and more even due to the electrostatic feature, and the drying time is also much quicker. The EC3 Electrostatic Sanitizer Fogger has the same 1 gallon tank capacity, 10-50-micron particle size, high-precision nozzles for greater output capacity, and high-performance blower for dispersing droplets of EC3 Mold Soultion Concentrate more widely and effectively than competing products, as well as ADVANCED ELECTROSTATIC TECHNOLOGY. Electrostatic technology provides a positive charge to the droplets as they spray from the machine. As a result, the droplets space more evenly on targeted surface areas for uniform coverage and stronger adhesion. Charged droplets wrap around the entire target surface which also eliminates puddling.  Directions: Fill fogger drum with EC3 Mold Solution Concentrate diluted per bottle instructions. Use the calibration dial to select the spray volume needed. Enter the room or space where the fogger will be used. Plug the fogger into an outlet. (We suggest using an extension cord to have more ability to move around a room or an object for best coverage.) Turn the fogger on and disperse the mist in a steady up/down motion, so that it fully fills and covers a room, or so that it is evenly applied all over a surface or object. Hold the fogger steady with the handle to ensure a steady flow of EC3 through the machine. Turn off when finished. Drain and clean fogger after use. EC3 Mold Solution Concentrate is safe for all materials, surfaces and fabrics. It is safe to treat items and areas as often as needed. EC3 Mold Solution Concentrate is safe for children and pets, does not off-gas, contains no harmful chemicals, and is not toxic. The fogger is best used to treat larger areas or items.

Read All less

Are you getting the most out of your EC3 Air Purification Candle? Proper candle care is essential for a clean, long-lasting, even burn.   You should be trimming your EC3 Air Purification Candle wick BEFORE each burn. Why? To reduce smoke, to prevent the wick from mushrooming or splitting, and to prevent the flame from getting too large and melting the wax too quickly or unevenly. This bundle is perfect for your EC3 Air Purification Candle care needs! What you get: 1 EC3 Air Purification Candle 1 specially designed, EC3 Candle Wick Trimmer The EC3 Air Purification Candle is a simple way to control mold levels in your indoor air. The heat from the flame aerosolizes the natural botanicals embedded in the soy wax. The candles have no added fragrance, so as not to aggravate chemical sensitivities common in mold sufferers. These candles can reduce the mold count in a room from TNC (Too Numerous to Count) to nearly 0 in less than 3 hours. Each candle will burn for approximately 16 hours. Do not use EC3 Candles if you have an allergy to soy. The EC3 Candle Wick Trimmer will help you get the most out of your EC3 Air Purification Candle? Proper candle care is essential for a clean, long-lasting, even burn. Trim your EC3 Air Purification Candle wick BEFORE each burn to reduce smoke, to prevent the wick from mushrooming or splitting, and to prevent the flame from getting too large and melting the wax too quickly or unevenly. Directions For Use: (Best Practice: Trim your EC3 Air Purification Candle wick back down to 1/4" before every burn, while the wax is solid and the candle is cooled.) 1. Open the wick trimmer and place the rounded base almost flush with the surface of the candle. 2. Hold the candle wick trimmer at a 45-degree angle to ensure a proper wick length of 1/4 inch. 3. Bring the two handles together to close and trim the wick. 4. Discard the wick trimming before lighting.

Read All less

Our All-Natural Air Purifying Candle Reduces Mold Counts and Mycotoxin Levels in Indoor Air - Contains Botanical Ingredients in Soy Wax and No Added Fragrance - Buy a 3 Pack and Save 7%. Reduce Mold Counts and Mycotoxin Levels in Indoor Air, All Natural, No Added Fragrance, Botanical Ingredients in Soy Wax.   Mold is a contributing factor in many long-term health problems.  As mold grows, it releases spores into the air that are easily inhaled through the nose and mouth.  Once breathed in, mold can cause allergic reactions, inflammation, and infection.  A high mold count in your environmental air can lead to sickness and can prevent healing.  Breathing clean air is important for good health and quality of life.   The EC3 Air Purification Candle is a simple way to control mold spore levels in the indoor air.  The heat from the burning wick aerosolizes the natural botanical embedded in the soy wax.  The wax has no added fragrances to avoid inflaming the chemical sensitivities common in sinusitis sufferers.  Each candle will burn for approximately 12 hours.  Read the independent laboratory report on EC3 Products effectiveness. Key Features and Benefits:Fast acting - Easy-to-use Natural botanicals embedded in soy wax Designed to work with EC3 Mold Spray Part of a complete system for managing indoor mold counts 30-day satisfaction guarantee The candles are designed to work with other EC3 Products to help maintain a healthier indoor environment.   Introducing our air purifying candles: the EC3 Air Purification Candle! These candles are designed to reduce mold counts and mycotoxin levels in the indoor air. Each candle is made with soy wax and a blend of natural, citrus seed botanicals. EC3 candles contain no added fragrance or chemicals and are best used in conjunction with our EC3 Mold Spray.  How do our candles work? The heat from the burning wick aerosolizes the natural botanicals embedded in the soy wax. The botanicals are both antifungal and antimicrobial. As they disperse, they work to deactivate mold spores and to bring particulates out of the air. The candles’ ingredients were specifically chosen so as not to inflame chemical sensitivities that are common in those who suffer from sinusitis and mold illness. Each candle burns for approximately 16 hours and is designed to treat a 600-square-foot indoor space. Contains: Natural Soy Wax, Lead free wick, and a proprietary natural botanical blend. Other: No added fragrance, so as not to aggravate chemical sensitivities Directions For Use: Open candle and place on flat surface inside of metal lid, away from walls, and flammable items. Burn for 3 hours continuously on first use to achieve optimal effects. Burn for one hour each day afterwards for mold maintenance. When finished burning, use a candle snuffer to put the flame out. We do not recommend blowing it out. Trim tip of wick before each use for best results. This reduces soot and smoke indoors. Each candle has a burn life of approximately 16 hours. A general guideline is to use one candle per 600 square feet of indoor space. Keep out of reach of children and pets. Do not leave burning candle unattended. Do not use EC3 Air Purification Candles if you are allergic to soy.

Read All less

Made with pure, ethically and sustainably sourced beeswax, these candles are an alternative to our original soy-based candles. But, just like our original formula, these candles do more than just provide a warm glow to your space. Infused with our unique, proprietary blend of citrus seed extracts, our beeswax candles help to purify the air by emitting negative ions that bind to positively charged particles, such as pollutants, allergens, and dust. Additionally, our special citrus seed blend is proven to fight mold growth by binding to airborne mold spores, disrupting their chitin shells and/or cellulose cell walls, and inhibiting viability and ability to proliferate. This 100% natural candle offers a long, clean burn, without toxic emissions or added synthetic fragrances and is 6 ounces--slightly larger than our original candles. With its honey scent, it creates a calming and rejuvenating atmosphere that promotes relaxation and wellbeing making our beeswax candles not only a conscious and sustainable choice, but also a choice that promotes a healthier and mold-free lifestyle. Contains: Locally, sustainably, and ethically sourced beeswax, lead-free wick, proprietary citrus botanical blend Other: Beeswax candles have a natural scent thanks to the floral nectar and honey constituent in the wax. Our candles contain no added fragrances or essential oils. Directions For Use: Open candle and place on flat surface, preferably inside of metal lid, away from walls, and any flammable items. Burn for 3 hours continuously on first use or until you achieve a full, uniform melt pool to achieve optimal effects. Burn for 2 hours or until you achieve a full melt pool every other day afterwards for maintenance. A full melt pool ensures that the citrus botanicals embedded in the wax are aerosolized and released into the air to do their work. When finished burning, we recommend using a candle snuffer to put the flame out. Trim tip of wick before each use for best results. Trimming the wick reduces soot and smoke. Each candle has a burn life of approximately 16 hours. A general guideline is to use one candle per 600 square feet of indoor space. Keep out of reach of children and pets. Do not leave burning candle unattended.

Read All less

The EC3 Air & Clothes Bundle helps you clean your indoor air and belongings for mold. All EC3 products are safe, non-toxic, and proven effective. Save 15% when you purchase these products as a bundle. The EC3 Air & Clothes Bundle includes:1 - 32 oz. EC3 Laundry Additive 1 - 3 pack of EC3 Air Purification Candles EC3 Air Purification Candles – 3 Pack are a simple way to control mold levels in your indoor air. The heat from the flame aerosolizes the natural botanicals embedded in the soy wax. The candles have no added fragrance, so as not to aggravate chemical sensitivities common in mold sufferers. These candles can reduce the mold count in a room from TNC (Too Numerous to Count) to nearly 0 in less than 3 hours. Each candle will burn for approximately 16 hours. Do not use EC3 Candles if you have an allergy to soy. The EC3 Laundry Additive is an all-natural, non-toxic, botanically-based rinse designed to remove the mold and bacteria that becomes trapped in your clothing and bedding. By adding two ounces to your regular wash, you will experience cleaner, fresher-smelling laundry. Regular use will also help keep your washing machine mold free and clean.

Read All less

Digest Assist is a full-spectrum digestive enzyme supplement designed to support each phase of digestion. In the gastric phase, betaine HCl and pepsin prime the stomach, ensuring proper pH to initiate the first phase of digestion. This sets up for the second stage of digestion, the enteric phase, in which high-concentration protease, amylase, lipase, and trypsin are released and activated in the small intestine to ensure proper protein breakdown and fat absorption. Digest Assist works to enhance digestion and ensure maximum nutrient intake.     Poor digestion is often a downstream result of mold exposure. Low stomach acid and nervous system dysfunction can produce bloating and gas, cramping, diarrhea or constipation, and even food intolerances. Incomplete digestion of food proteins may also be linked to food allergies, and improper digestion of foodstuffs can cause foods to be fermented in the gut, leading to the proliferation of “bad” bacteria and yeast. Digest Assist is a comprehensive blend of enzymes used to support healthy digestion and maximize nutrient absorption. The enzyme blend supports HCL acid and pepsin production to break down proteins, and also contains lipase, amylase and other enzymes that break down fats, sugars and other complex molecules to make it easier for your body to absorb them. More complete digestion also removes a potential food source for bad bacteria and allows for the breakdown of food proteins which helps support regular bowel movements. Does Not Contain: Gluten, yeast, artificial colors and flavors Directions For Use: 1-2 capsules before each meal or as recommended by your health care professional

Read All less

Complete Thymic Formula combines a comprehensive blend of vitamins and minerals with herbs and glandular factors to form a solid foundation of nutritional support to bolster your body's natural defense systems. Complete Thymic Formula combines cutting edge vitamin, mineral, and thymus gland support for a solid and wholesome foundation of nutrition while making factors that nourish and strengthen immune function more bioavailable. A supplement designed as “preventative medicine,” it contains a synergistic blend of herbs, essential vitamins, minerals and amino acids, thymic and other glandular extracts, antioxidants, enzymes and whole food extracts. Patented assimilation technology aids absorption, especially if digestion is compromised. The thymus gland is an organ located in your upper chest, under your breastbone. It produces white blood cells also known as T-lymphocytes or T cells. Your immune system uses T cells to detect foreign invaders, defend your body, fight infection, and maintain tissue health. Thymus diseases can arise from genes, autoimmune diseases, and cancer. Thymus diseases can be diagnosed using x-rays, CT scans, MRIs, or PET scans, depending on the source of the disease. While many with worsening thymus gland health or thymus diseases do not exhibit symptoms, the following symptoms may indicate thymus problems: Reduced immune response and frequent sickness Muscle fatigue Drooping eyelids Blueish skin color Difficulty breathing or shortness of breath Chest pain Bloody cough Headache or dizziness Swelling of the head, face or neck Weigh loss Loss of appetite Difficulty swallowing Complete Thymic Formula supports healthy functioning of the thymus gland for strengthened immunity and overall health. You may benefit from taking this formula if you have thymus disease, an autoimmune disease, or an otherwise compromised immune system. This formula combines vitamins and minerals that benefit the thymus gland, such as A, C, D-3, and E. It also contains vitamins B-1, B-2, B-6, and B-12 (methyl cobalamin) as well as other forms of B vitamins like niacinamide, 5-methyltetrahydrofolate (a must for those with methylation pathway (MTHFR) defects), and biotin.  Zinc, a trace mineral that generally supports immune health, may be critical for thymus gland function and hormone activity. Selenium, another critical trace mineral, is added to help promote T cell proliferation. Directions For Use: Take 6 tablets daily (3 in the morning, 3 in the evening) with 8 oz. of water as a dietary supplement. For preventative use or maintenance, serving size may be reduced to 2 tablets, 2 times daily with food.

Read All less

CitriDrops Dietary Supplement combines four different citrus seed extracts including grapefruit seed extract, into one dietary supplement for maximum effectiveness against bacteria and fungus.  Safe for both topical and oral use, CitriDrops Dietary Supplement is a beneficial addition to anyone's diet or nose-rinsing regimen to rid the body of pathogenic bacteria, viruses, and fungus.  Citrus seed extracts have been studied and safely used for decades for their anti-microbial and anti-fungal properties.  Your gut wall houses 70% of the cells that make up your immune system.  Digestive problems and gut inflammation can be attributed to allergies, autoimmune diseases (arthritis, irritable bowel syndrome, acne, fatigue), mood disorders, and other chronic illnesses.  CitriDrops Dietary Supplement is designed to aid the immune system in stopping the cycle of inflammation by helping to manage the "bad gut flora" in the digestive tract when taken orally, and to alleviate fungal allergy symptoms when used in a nasal wash.  Saline nasal irrigation with CitriDrops Dietary Supplement leverages the anti-fungal and anti-microbial properties of the citrus seed extracts to stimulate and thin mucous flow, soothe inflamed tissue, augment repair processes, reduce forceful nose blowing, and improve olfaction. This product is a recommended part of the Body Treatment Protocol, developed by Dr. Don Dennis, for sufferers of Chronic Sinusitis or other mold related diseases.   CitriDrops Dietary Supplement can also be used to rinse mold from produce and for personal hygiene purposes where mold or fungus may be an issue.   Key Features and Benefits - Contains a proprietary blend of 4 different citrus seed extracts - More powerful and effective than products containing grapefruit seed extract (GSE) alone - Will not create fungal resistance - Can be used with CitriDrops Nasal Spray for great results - 30-day Satisfaction guarantee Ingredients: A proprietary blend of citrus seed extracts including grapefruit, lemon, lime, and tangerine, Purified Water and Vegetable Glycerin Directions for use: As a dietary supplement: Put 8 to 10 drops of CitriDrops Dietary Supplement to 8 ounces of water and drink 1-3 times daily to support immune system function. Directions for use in a nasal rinse: Add 1 drop of CitriDrops Dietary Supplement for every ounce of water in saline nose washes.

Read All less

Our Chitosan-BioFlav supplement contains a blend of chitosan oligosaccharides, chitosan and the bioflavonoids Rutin and Luteolin. Chitosan itself is more of a fiber and contributes to detoxification in the GI tract, whereas Chitosan oligosaccharide (CO) supports detoxification in blood and other tissues. The powerful bioflavonoids in the product are made more bioavailable by the CO and provide clinically significant vascular, neuroprotective, and immune health benefits. In a small clinical trial of people being treated for Borrelia and experiencing Herxheimer’s reactions, the use of CO improved Herxheimer’s symptoms by the end of one week. In subjects with pain, 100% reported significant improvement (in half of these, the pain completely resolved), and of those with sleep disturbances, 75% reported sleeping more deeply and waking up more well rested. The research on chitosan oligosaccharides alone is extensive and shows great potential to benefit health. Chitosan oligosaccharides can promote the growth of friendly bifidobacteria and lactobacillus. Unlike fructooligosaccharides (FOS), which promote the growth of only three probiotic strains, chitosan oligosaccharide supports many bifidobacteria and lactobacillus species. Chitosan oligosaccharide has also been shown to protect the liver from damage by carbon tetrachloride in mice, and to protect against mercury toxicity. It can promote the activity of antioxidant enzymes and help prevent lipid peroxidation, helping to protect mice poisoned with dioxin. It has also shown potential to support microbial balancing and other immune functions. When Rutin and Luteolin, two powerful flavonoids, are combined with the CO, vascular and neurological benefits are further enhanced. Rutin is a glycoside of quercetin, enhancing its bioavailability and vascular effects. Luteolin acts more directly on inflammatory pathways like COX-2 and interleukins, especially in the brain. Together, they may modulate nitric oxide signaling, oxidative stress, and immune activation more effectively than either alone. Luteolin blocks inflammatory chemicals from brain immune cells, while rutin supports vascular integrity and antioxidant defenses. This combo has shown promise in reducing symptoms like brain fog, agitation, and sensory sensitivity. In clinical practice, Dr. Dennis has also discovered that when combined with his Sinus Protocol, the use of the contents of Chitosan-BioFlav capsules added in a nasal rinse with simple saline can help to resolve early fungal polyps in the sinuses. Key Features and Potential Chitosan-BioFlav Benefits: Antimicrobial activity: It has broad-spectrum antifungal properties that help reduce mold colonization in the body, especially in the sinuses and gut Capillary strength: It reinforces blood vessel integrity, which is often compromised in mold illness due to inflammation and histamine release. Brain fog relief: Neuroprotective effects, helping reduce mold-induced cognitive symptoms like memory loss and confusion. Mast cell stabilization: Calms overactive mast cells, which are often triggered by mold exposure and contribute to histamine intolerance. Anti-inflammatory and antioxidant: Suppresses NF-kB and other inflammatory pathways, supporting recovery from systemic inflammation. Gut barrier support: It helps restore intestinal integrity, which is often compromised in mold illness due to mycotoxin-induced leaky gut.  Product Details: Chitosan-BioFlav is a combination of chitosan, chitosan oligosaccharides, Rutin, and Luteolin. Ingredients: Vitamin C (as Ascorbic Acid), Chitosan Oligosaccharide, Chitosan, Rutin, Luteolin Suggested Use: As a dietary supplement, 1 to 3 capsules daily, or as directed by a healthcare practitioner. WARNING: Avoid this product if you are allergic to shellfish, pregnant or lactating.

Read All less

Our Chitosan-BioFlav supplement contains a blend of chitosan oligosaccharides, chitosan and the bioflavonoids Rutin and Luteolin. Chitosan itself is more of a fiber and contributes to detoxification in the GI tract, whereas Chitosan oligosaccharide (CO) supports detoxification in blood and other tissues. The powerful bioflavonoids in the product are made more bioavailable by the CO and provide clinically significant vascular, neuroprotective, and immune health benefits. In a small clinical trial of people being treated for Borrelia and experiencing Herxheimer’s reactions, the use of CO improved Herxheimer’s symptoms by the end of one week. In subjects with pain, 100% reported significant improvement (in half of these, the pain completely resolved), and of those with sleep disturbances, 75% reported sleeping more deeply and waking up more well rested. The research on chitosan oligosaccharides alone is extensive and shows great potential to benefit health. Chitosan oligosaccharides can promote the growth of friendly bifidobacteria and lactobacillus. Unlike fructooligosaccharides (FOS), which promote the growth of only three probiotic strains, chitosan oligosaccharide supports many bifidobacteria and lactobacillus species. Chitosan oligosaccharide has also been shown to protect the liver from damage by carbon tetrachloride in mice, and to protect against mercury toxicity. It can promote the activity of antioxidant enzymes and help prevent lipid peroxidation, helping to protect mice poisoned with dioxin. It has also shown potential to support microbial balancing and other immune functions. When Rutin and Luteolin, two powerful flavonoids, are combined with the CO, vascular and neurological benefits are further enhanced. Rutin is a glycoside of quercetin, enhancing its bioavailability and vascular effects. Luteolin acts more directly on inflammatory pathways like COX-2 and interleukins, especially in the brain. Together, they may modulate nitric oxide signaling, oxidative stress, and immune activation more effectively than either alone. Luteolin blocks inflammatory chemicals from brain immune cells, while rutin supports vascular integrity and antioxidant defenses. This combo has shown promise in reducing symptoms like brain fog, agitation, and sensory sensitivity. In clinical practice, Dr. Dennis has also discovered that when combined with his Sinus Protocol, the use of the contents of Chitosan-BioFlav capsules added in a nasal rinse with simple saline can help to resolve early fungal polyps in the sinuses. Key Features and Potential Chitosan-BioFlav Benefits: Antimicrobial activity: It has broad-spectrum antifungal properties that help reduce mold colonization in the body, especially in the sinuses and gut. Capillary strength: It reinforces blood vessel integrity, which is often compromised in mold illness due to inflammation and histamine release. Brain fog relief: Neuroprotective effects, helping reduce mold-induced cognitive symptoms like memory loss and confusion. Mast cell stabilization: Calms overactive mast cells, which are often triggered by mold exposure and contribute to histamine intolerance. Anti-inflammatory and antioxidant: Suppresses NF-kB and other inflammatory pathways, supporting recovery from systemic inflammation. Gut barrier support: It helps restore intestinal integrity, which is often compromised in mold illness due to mycotoxin-induced leaky gut. Product Details: Chitosan-BioFlav is a combination of chitosan, chitosan oligosaccharides, Rutin, and Luteolin. Ingredients: Vitamin C (as Ascorbic Acid), Chitosan Oligosaccharide, Chitosan, Rutin, Luteolin Suggested Use: As a dietary supplement, 1 to 3 capsules daily, or as directed by a healthcare practitioner. WARNING: Avoid this product if you are allergic to shellfish, pregnant or lactating.

Read All less

CellTropin is Micro Balance Health Products’ homeopathic spray that is formulated to support the function of your pituitary and endocrine glands. It promotes cellular recovery and healing, especially for people who have been compromised by mold and environmental toxins. Designed to provide pituitary, circulatory and DNA support to stimulate cellular healing and turnover, it can be particularly beneficial to those who suffer from immune system stress and environmental toxicity. The key to faster recovery, clearer brain function, better sleep, and increased energy is cellular turnover. When environmental toxins enter the picture, the body sometimes halts hormone secretion and healing processes as part of the "cell danger response". Even after the body is no longer in danger, the immune system can remain stuck and normal hormonal and healing processes do not resume.  CellTropin is formulated with Hypophysis suis 6X, 12X, 30X to support optimal pituitary function and to normalize hormones naturally. CellTropin also contains Arginine to support circulation, Ginkgo Biloba for energy and mood support, and Astragalus Excapus to decrease the DNA damage inherent with toxic exposure.  Key Features and Benefits of CellTropin include:- Immune and Endocrine system support comprised of homeopathic formula pituitary factors, Arginine, Ginkgo Biloba, and Astragalus Excapus - Initiates the healing process at the cellular level to speed recovery and prevent further damage - Is an excellent companion to Sinus Defense, also available here on Micro Balance Health Products  Active Ingredients: Hypophysis Suis 6x,12x,30x. Arginine 3x, 6x, 12x, 30x. Silicea 9x. Astragalus Excapus 12c. Inactive Ingredients: Alcohol USP 20%, Purified Water Directions For Use: Use 3 to 4 sprays under the tongue, 2-3 times a day. After spraying, hold for 10-15 seconds under the tongue before swallowing. Do not use within 15 minutes (before or after) of consuming beverages, food, or brushing teeth. For maximum benefit, stay the course, using the spray 2-3 times a day for at least 1 month. You do not need to cycle on and off this supplement as the benefits will increase with the length of use. It is normal to decrease dosage to 1 time per day once symptoms subside. It designed to be used as an integral and long-term aid for overall health and recovery.

Read All less